Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2007COBALT L4-2.2LREPAIR AND DIAGNOSISDIAGRAMSCONNECTOR VIEWSAIR BAG SYSTEMSSYSTEM DIAGRAM
2007 Chevrolet Cobalt L4-2.2L
System Diagram
2007 Chevrolet Cobalt L4-2.2LSECTION System Diagram
SIR Connector End Views
Inflatable Restraint Front End Sensor
Inflatable Restraint Front Passenger Presence System (PPS) Module
Inflatable Restraint Front Passenger Presence System (PPS) Sensor
Inflatable Restraint I/P Module C1
Inflatable Restraint I/P Module C2
Inflatable Restraint Passenger Air Bag On/Off Indicator
Inflatable Restraint Passenger Seat Belt Tension Sensor
Inflatable Restraint Roof Rail Module - Left (ASF)
Inflatable Restraint Roof Rail Module - Right (ASF)
Inflatable Restraint Sensing and Diagnostic Module (SDM) (w/ASF)
Inflatable Restraint Sensing and Diagnostic Module (SDM) (w/o ASF)
Inflatable Restraint Side Impact Sensor - Left (ASF)
Inflatable Restraint Side Impact Sensor - Right (ASF)
Inflatable Restraint Steering Wheel Module C1
Inflatable Restraint Steering Wheel Module C2
Inflatable Restraint Steering Wheel Module Coil C1
Inflatable Restraint Steering Wheel Module Coil C2
Inflatable Restraint Steering Wheel Module Coil C3
Seat Belt Retractor Pretensioner - Driver
Seat Belt Retractor Pretensioner - Passenger
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.