Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2007AVEO L4-1.6LREPAIR AND DIAGNOSISWINDOWS AND GLASSWINDOWSSERVICE AND REPAIRFRONT SIDE DOOR WINDOW REPLACEMENT
2007 Chevrolet Aveo L4-1.6L
Front Side Door Window Replacement
2007 Chevrolet Aveo L4-1.6LSECTION Front Side Door Window Replacement
Front Side Door Window Replacement
Removal Procedure
1. Remove the front door trim panel.
2. Remove the door seal trim.
3. Remove the outside channel molding.
4. Remove the screws that secure the glass to the window regulator.
5. Remove the bolts and the guide rail.
6. Remove the glass from the door.
Installation Procedure
1. Install the glass in the door.
Notice: Refer to Fastener Notice.
2. Install the guide rail and the bolts.
Tighten the guide rail bolts to 7 N.m (62 lb in).
3. Install the glass to the window regulator with the screws.
Tighten the door glass screws to 7 N.m (62 lb in).
4. Install the outside channel molding.
5. Install the door seal trim.
6. Install the front door trim panel.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.