Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006TRAILBLAZER 4WD V8-5.3L VIN MREPAIR AND DIAGNOSISDIAGRAMSEXPLODED VIEWSSTEERING GEAR
2006 Chevrolet TrailBlazer 4WD V8-5.3L VIN M
Steering Gear
2006 Chevrolet TrailBlazer 4WD V8-5.3L VIN MSECTION Steering Gear
Power Steering Gear Disassembled View
Power Steering Gear Disassembled View:
1 - Torque Prevailing Nut
2 - Outer Tie Rod Assembly
3 - Hexagon Jam Nut
4 - Tie Rod End Clamp
5 - Rack and Pinion Boot
6 - Boot Clamp
7 - Inner Tie Rod Assembly
8 - Shock Dampener Ring
9 - External TORX(R) Screw
10 - Cylinder Line Retaining Plate
11 - O-ring Seal
12 - Cylinder (RH) Line
13 - Cylinder (LH) Line
14 - O-ring Seal
15 - Rack and Pinion Gear (Partial)
16 - Shock Dampener Ring
17 - Inner Tie Rod Assembly
18 - Boot Clamp
19 - Rack and Pinion Boot
20 - Tie Rod End Clamp
21 - Hexagon Jam Nut
22 - Outer Tie Rod Assembly
23 - Torque Prevailing Nut
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.