Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SILVERADO SS V8-6.0L VIN NREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYPISTON, ENGINE
2006 Chevrolet Silverado SS V8-6.0L VIN N
Piston, Engine
2006 Chevrolet Silverado SS V8-6.0L VIN NSECTION Piston, Engine
Piston - Piston Diameter - Measured Over Coating - at size point 101.611-101.642 mm (4.0-4.001 inch)
Piston - Piston to Bore Clearance - Production -0.022 to + 0.33 mm - interference -0.0009 to +0.0012 in - interference
Piston - Piston to Bore Clearance - with Skirt Coating Worn Off - Service 0.024-0.08 mm (0.00094-0.0031 inch)
Piston - Piston to Bore Clearance - Production -0.022 to + 0.33 mm - interference -0.0009 to +0.0012 in - interference
Piston - Piston to Bore Clearance - with Skirt Coating Worn Off - Service 0.024-0.08 mm (0.00094-0.0031 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.