Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SILVERADO SS V8-6.0L VIN NREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSBRAKES AND TRACTION CONTROLSYSTEM SPECIFICATIONS
2006 Chevrolet Silverado SS V8-6.0L VIN N
System Specifications
2006 Chevrolet Silverado SS V8-6.0L VIN NSECTION System Specifications
Front Brakes (RPO JC4)
Rotor Discard Thickness * 27.50 mm (1.082 inch)
Rotor Minimum Allowable Thickness After Refinish 28.0 mm (1.10 inch)
Rotor Thickness (new) 29.0 mm (1.14 inch)
Rotor Maximum Allowable Lateral Runout 0.13 mm (0.005 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Front Brakes (RPO's JF3/JF7)
Rotor Discard Thickness * 28.0 mm (1.10 inch)
Rotor Minimum Allowable Thickness After Refinish 28.0 mm (1.10 inch)
Rotor Thickness (new) 30.0 mm (1.181 inch)
Rotor Maximum Allowable Lateral Runout 0.05 mm (0.002 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Front Brakes (RPO JH1)
Rotor Discard Thickness * 27.50 mm (1.082 inch)
Rotor Minimum Allowable Thickness After Refinish 28.0 mm (1.10 inch)
Rotor Thickness (new) 29.0 mm (1.14 inch)
Rotor Maximum Allowable Lateral Runout 0.13 mm (0.005 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Front Brakes (RPO JH6)
Rotor Discard Thickness * 36.50 mm (1.437 inch)
Rotor Minimum Allowable Thickness After Refinish 37.0 mm (1.46 inch)
Rotor Thickness (new) 38.0 mm (1.50 inch)
Rotor Maximum Allowable Lateral Runout 0.13 mm (0.005 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Front Brakes (RPO JH7)
Rotor Discard Thickness * 36.50 mm (1.437 inch)
Rotor Minimum Allowable Thickness After Refinish 37.0 mm (1.46 inch)
Rotor Thickness (new) 38.0 mm (1.50 inch)
Rotor Maximum Allowable Lateral Runout 0.13 mm (0.005 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Rear Brakes (RPO JC4)
Rotor Discard Thickness * 28.50 mm (1.122 inch)
Rotor Minimum Allowable Thickness After Refinish 29.0 mm (1.142 inch)
Rotor Thickness (new) 30.0 mm (1.181 inch)
Rotor Maximum Allowable Lateral Runout 0.13 mm (0.005 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Rear Brakes (RPO JH1)
Rotor Discard Thickness * 18.50 mm (0.728 inch)
Rotor Minimum Allowable Thickness After Refinish 19.0 mm (0.748 inch)
Rotor Thickness (new) 20.0 mm (0.787 inch)
Rotor Maximum Allowable Lateral Runout 0.13 mm (0.005 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Rear Brakes (RPO JH6)
Rotor Discard Thickness * 27.50 mm (1.082 inch)
Rotor Minimum Allowable Thickness After Refinish 28.0 mm (1.102 inch)
Rotor Thickness (new) 29.0 mm (1.141 inch)
Rotor Maximum Allowable Lateral Runout 0.13 mm (0.005 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Rear Brakes (RPO JH7)
Rotor Discard Thickness * 28.5 mm (1.122 inch)
Rotor Minimum Allowable Thickness After Refinish 29.0 mm (1.142 inch)
Rotor Thickness (new) 30.0 mm (1.181 inch)
Rotor Maximum Allowable Lateral Runout 0.13 mm (0.005 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications.
Rotor Discard Thickness * 27.50 mm (1.082 inch)
Rotor Minimum Allowable Thickness After Refinish 28.0 mm (1.10 inch)
Rotor Thickness (new) 29.0 mm (1.14 inch)
Rotor Maximum Allowable Lateral Runout 0.13 mm (0.005 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Front Brakes (RPO's JF3/JF7)
Rotor Discard Thickness * 28.0 mm (1.10 inch)
Rotor Minimum Allowable Thickness After Refinish 28.0 mm (1.10 inch)
Rotor Thickness (new) 30.0 mm (1.181 inch)
Rotor Maximum Allowable Lateral Runout 0.05 mm (0.002 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Front Brakes (RPO JH1)
Rotor Discard Thickness * 27.50 mm (1.082 inch)
Rotor Minimum Allowable Thickness After Refinish 28.0 mm (1.10 inch)
Rotor Thickness (new) 29.0 mm (1.14 inch)
Rotor Maximum Allowable Lateral Runout 0.13 mm (0.005 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Front Brakes (RPO JH6)
Rotor Discard Thickness * 36.50 mm (1.437 inch)
Rotor Minimum Allowable Thickness After Refinish 37.0 mm (1.46 inch)
Rotor Thickness (new) 38.0 mm (1.50 inch)
Rotor Maximum Allowable Lateral Runout 0.13 mm (0.005 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Front Brakes (RPO JH7)
Rotor Discard Thickness * 36.50 mm (1.437 inch)
Rotor Minimum Allowable Thickness After Refinish 37.0 mm (1.46 inch)
Rotor Thickness (new) 38.0 mm (1.50 inch)
Rotor Maximum Allowable Lateral Runout 0.13 mm (0.005 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Rear Brakes (RPO JC4)
Rotor Discard Thickness * 28.50 mm (1.122 inch)
Rotor Minimum Allowable Thickness After Refinish 29.0 mm (1.142 inch)
Rotor Thickness (new) 30.0 mm (1.181 inch)
Rotor Maximum Allowable Lateral Runout 0.13 mm (0.005 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Rear Brakes (RPO JH1)
Rotor Discard Thickness * 18.50 mm (0.728 inch)
Rotor Minimum Allowable Thickness After Refinish 19.0 mm (0.748 inch)
Rotor Thickness (new) 20.0 mm (0.787 inch)
Rotor Maximum Allowable Lateral Runout 0.13 mm (0.005 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Rear Brakes (RPO JH6)
Rotor Discard Thickness * 27.50 mm (1.082 inch)
Rotor Minimum Allowable Thickness After Refinish 28.0 mm (1.102 inch)
Rotor Thickness (new) 29.0 mm (1.141 inch)
Rotor Maximum Allowable Lateral Runout 0.13 mm (0.005 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
Rear Brakes (RPO JH7)
Rotor Discard Thickness * 28.5 mm (1.122 inch)
Rotor Minimum Allowable Thickness After Refinish 29.0 mm (1.142 inch)
Rotor Thickness (new) 30.0 mm (1.181 inch)
Rotor Maximum Allowable Lateral Runout 0.13 mm (0.005 inch)
Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.