Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006OPTRA (CANADA) L4-2.0LREPAIR AND DIAGNOSISLIGHTING AND HORNSMARKER LAMPSERVICE AND REPAIR
2006 Chevrolet Optra (CANADA) L4-2.0L
Marker Lamp: Service and Repair
2006 Chevrolet Optra (CANADA) L4-2.0LSECTION Service and Repair
Marker Lamp Replacement - Side
Removal Procedure
Caution: Refer to Battery Disconnect Caution Battery Disconnect Caution.
1. Disconnect the negative battery cable.
2. Remove the headlamp. Refer to Headlamp Replacement (Four Door/Wagon) Headlamp Replacement (Four Door/Wagon)Headlamp Replacement (Hatchback) Headlamp Replacement (Hatchback).
3. Disconnect the electrical connector.
4. Remove the side marker lamp.
Installation Procedure
1. Connect the electrical connector.
2. Install the side marker lamp.
3. Install the headlamp. Refer to Headlamp Replacement (Four Door/Wagon) Headlamp Replacement (Four Door/Wagon)Headlamp Replacement (Hatchback) Headlamp Replacement (Hatchback).
4. Connect the negative battery cable.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.