Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006OPTRA (CANADA) L4-2.0LREPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLDISC BRAKE SYSTEMSERVICE AND REPAIRDISC BRAKE SPLASH SHIELD REPLACEMENT - FRONT
2006 Chevrolet Optra (CANADA) L4-2.0L
Disc Brake Splash Shield Replacement - Front
2006 Chevrolet Optra (CANADA) L4-2.0LSECTION Disc Brake Splash Shield Replacement - Front
Disc Brake Splash Shield Replacement - Front
Removal Procedure
1. Remove the rotor. Refer to Brake Rotor Replacement - Front Brake Rotor Replacement - Front.
2. Remove the screws for the splash shield from the steering knuckle.
3. Remove the splash shield.
Installation Procedure
1. Install the splash shield.
Notice: Refer to Fastener Notice Fastener Notice in Cautions and Notices.
2. Secure the splash shield to the steering knuckle with the screws.
Tighten the splash shield-to-steering knuckle screws to 4 Nm (35 lb in).
3. Install the rotor. Refer to Brake Rotor Replacement - Front Brake Rotor Replacement - Front.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.