Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006OPTRA (CANADA) L4-2.0LREPAIR AND DIAGNOSISBODY AND FRAMESEATSSEAT BACKSERVICE AND REPAIRSEAT BACK REPLACEMENT - FRONT
2006 Chevrolet Optra (CANADA) L4-2.0L
Seat Back Replacement - Front
2006 Chevrolet Optra (CANADA) L4-2.0LSECTION Seat Back Replacement - Front
Seat Back Replacement - Front
Removal Procedure
1. Remove the front bucket seat from the vehicle. Refer to Seat Replacement - Front Bucket Seat Replacement - Front Bucket.
2. Remove the each seat trim.
3. Disconnect the electrical connectors.
4. Remove the bolts and the seatback.
Installation Procedure
1. Install the seatback onto the seat cushion.
Notice: Refer to Fastener Notice Fastener Notice in Cautions and Notices.
2. Install the front seatback bolts.
Tighten the front seatback bolts to 45 Nm (33 lb ft).
3. Connect the electrical connectors.
4. Install the seat trims to its original position.
5. Install the front bucket seat in the vehicle. Refer to Seat Replacement - Front Bucket Seat Replacement - Front Bucket.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.