Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006OPTRA (CANADA) L4-2.0LREPAIR AND DIAGNOSISBODY AND FRAMESEATSHEAD RESTSERVICE AND REPAIR
2006 Chevrolet Optra (CANADA) L4-2.0L
Head Rest: Service and Repair
2006 Chevrolet Optra (CANADA) L4-2.0LSECTION Service and Repair
Head Restraint Replacement
Removal Procedure
1. Press in the head restraint adjust button and remove the head restraint from the seatback.
2. Insert 2 flat head screwdrivers down the front and back side of the guide sleeves.
3. With the screwdrivers, press in the retaining latches and remove the guide sleeves.
Installation Procedure
1. Install the guide sleeves into the seatback and press them down to engage the guide sleeve retaining latches.
2. Install the head restraint into the guide sleeves.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.