Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006MALIBU V6-3.9L VIN 1REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYPISTON, ENGINE
2006 Chevrolet Malibu V6-3.9L VIN 1
Piston, Engine
2006 Chevrolet Malibu V6-3.9L VIN 1SECTION Piston, Engine
Piston Diameter - production 98.970-99.008 mm (3.896-3.897 inch)
Piston Diameter - service limit 98.950 mm (3.895 inch)
Piston Pin Bore Diameter 23.957-23.962 mm (0.943 inch)
Piston Ring Groove Width 1.22-1.24 mm (0.048-0.049 inch)
Piston to Bore Clearance - production -0.008-0.048 mm (-0.0003-0.0018 in
Piston to Bore Clearance - service limit - Maximum 0.080 mm (0.003 inch)
Piston Diameter - service limit 98.950 mm (3.895 inch)
Piston Pin Bore Diameter 23.957-23.962 mm (0.943 inch)
Piston Ring Groove Width 1.22-1.24 mm (0.048-0.049 inch)
Piston to Bore Clearance - production -0.008-0.048 mm (-0.0003-0.0018 in
Piston to Bore Clearance - service limit - Maximum 0.080 mm (0.003 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.