Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006MALIBU V6-3.9L VIN 1REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYPISTON PIN, ENGINE
2006 Chevrolet Malibu V6-3.9L VIN 1
Piston Pin, Engine
2006 Chevrolet Malibu V6-3.9L VIN 1SECTION Piston Pin, Engine
Piston Pin Clearance to Connecting Rod Bore - Press Fit -0.004-0.021 mm (-0.0008 inch)
Piston Pin Clearance to Piston Pin Bore 0.002-0.010 mm (0.00008-0.0004 inch)
Piston Pin Diameter 23.952-23.955 mm (0.942-0.943 inch)
Piston Pin Length 64.21-64.44 mm (2.57-2.53 inch)
Piston Pin Clearance to Piston Pin Bore 0.002-0.010 mm (0.00008-0.0004 inch)
Piston Pin Diameter 23.952-23.955 mm (0.942-0.943 inch)
Piston Pin Length 64.21-64.44 mm (2.57-2.53 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.