Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006MALIBU V6-3.9L VIN 1REPAIR AND DIAGNOSISBODY AND FRAMESEATSSERVICE AND REPAIRPROCEDURESFRONT SEAT FRAME ASSEMBLY REPLACEMENT - DRIVER
2006 Chevrolet Malibu V6-3.9L VIN 1
Front Seat Frame Assembly Replacement - Driver
2006 Chevrolet Malibu V6-3.9L VIN 1SECTION Front Seat Frame Assembly Replacement - Driver
FRONT SEAT FRAME ASSEMBLY REPLACEMENT - DRIVER
REMOVAL PROCEDURE
1. Remove the front seat from the vehicle.
CAUTION: Refer to SIR Caution.
2. Remove the seat cushion cover and pad.
3. Remove the seat back cover and pad.
4. Remove the lumbar/back suspension.
5. Remove the cushion suspension.
6. Remove the wire harness, if equipped.
INSTALLATION PROCEDURE
1. Install the wire harness, if equipped.
2. Install the cushion suspension.
3. Install the lumbar/back suspension.
4. Install the seat back cover and pad.
5. Install the seat cushion cover and pad.
6. Install the front seat to the vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.