Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006MALIBU V6-3.9L VIN 1REPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTPEDAL POSITIONING SYSTEMTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESSCAN TOOL DATA DEFINITIONS
2006 Chevrolet Malibu V6-3.9L VIN 1
Scan Tool Data Definitions
2006 Chevrolet Malibu V6-3.9L VIN 1SECTION Scan Tool Data Definitions
SCAN TOOL DATA DEFINITIONS
BODY CONTROL MODULE
Adjustable Pedal Inhibit Command: The scan tool displays the current state of the Adjustable Pedal Inhibit circuit to the adjustable pedal module. When the transmission selector is in the Park position and the ignition switch is in ACC or RUN the BCM will command this output Inactive and in any other position the inhibit control will be Active.
Battery Voltage Signal: The scan tool displays 0.0-16.0 volts. The battery voltage input represents the system voltage measured at the module ignition feed input.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.