Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006MALIBU V6-3.5L VIN 8REPAIR AND DIAGNOSISWINDOWS AND GLASSHEATED GLASS ELEMENTTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESSCAN TOOL DATA DEFINITIONS
2006 Chevrolet Malibu V6-3.5L VIN 8
Scan Tool Data Definitions
2006 Chevrolet Malibu V6-3.5L VIN 8SECTION Scan Tool Data Definitions
SCAN TOOL DATA DEFINITIONS
BODY CONTROL MODULE (BCM) C60 C68
Battery Voltage Signal: The scan tool displays the vehicle voltage.
Rear Defog Relay Cmd.: The scan tool displays On/Off. When the rear window defogger switch is depressed, the body control module (BCM) energizes the Rear Window Defogger relay by suppling a B+ to the control circuit of the relay, when the scan tool displays as On.
Rear Defog Switch: The scan tool displays Off /On. When the rear window defogger switch is depressed, the HVAC control module sends a message over Low Speed GMLAN to the BCM. When the switch is depressed the scan tool will display On.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.