Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006IMPALA V6-3.5L VIN K FLEX FUELREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYCONNECTING ROD, ENGINE
2006 Chevrolet Impala V6-3.5L VIN K Flex Fuel
Connecting Rod, Engine
2006 Chevrolet Impala V6-3.5L VIN K Flex FuelSECTION Connecting Rod, Engine
Connecting Rod Bearing Cap Bolt
First Pass 25 Nm (18 ft. lbs.)
Final Pass 110 degrees
Connecting Rod Bore Diameter 60.322 - 60.338 mm (2.375 - 2.376 inch)
Connecting Rod Bore Out - of - Round 0.006 mm (0.00023 inch)
Connecting Rod Length - Center to Center 150 mm (5.9 inch)
Connecting Rod Side Clearance 0.200 - 0.241 mm (0.008 - 0.009 inch)
First Pass 25 Nm (18 ft. lbs.)
Final Pass 110 degrees
Connecting Rod Bore Diameter 60.322 - 60.338 mm (2.375 - 2.376 inch)
Connecting Rod Bore Out - of - Round 0.006 mm (0.00023 inch)
Connecting Rod Length - Center to Center 150 mm (5.9 inch)
Connecting Rod Side Clearance 0.200 - 0.241 mm (0.008 - 0.009 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.