Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Scan Tool Data Definitions
2006 Chevrolet HHR L4-2.4LSECTION Scan Tool Data Definitions
SCAN TOOL DATA DEFINITIONS
Trunk Ajar Switch: The scan tool displays Trunk Closed/Trunk Ajar. The scan tool displays Trunk Ajar when the liftgate is open.
Trunk Motor: : The scan tool displays On/Off. The scan tool will display the state of the liftgate release.
Trunk Release Solenoid: The scan tool displays On/Off. The scan tool momentarily displays On when the liftgate release is commanded ON.
Trunk Release Switch: The scan tool displays Active/Inactive. The scan tool displays active when the liftgate release switch is depressed.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.