Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006EXPRESS 3500 V8-6.0L VIN UREPAIR AND DIAGNOSISBODY AND FRAMELOCKSKEYLESS ENTRYTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESSCAN TOOL DATA DEFINITIONS
2006 Chevrolet Express 3500 V8-6.0L VIN U
Scan Tool Data Definitions
2006 Chevrolet Express 3500 V8-6.0L VIN USECTION Scan Tool Data Definitions
SCAN TOOL DATA DEFINITIONS
8-Digit GM Part Number: The scan tool displays an 8 digit number which indicates the GM part number of the module.
No. of Fobs Programmed: The scan tool displays 1 Fob - 4 Fobs to indicate the number of keyless entry transmitters that are programmed for the system.
Calibration ID: The scan tool displays a 4 digit number which indicates the calibration ID number of the module.
Invalid Transmitter: The scan tool displays More Than 10 or Less Than 10 which indicates how many times an invalid transmitter has been used in the vicinity of the vehicle.
Key Fob 1 Low Voltage: The scan tool displays counts which indicates the number of times a low battery voltage level was received.
Key Fob 1 Battery Status: The scan tool displays OK to indicate a good battery voltage level was last received.
Key Fob 2 Low Voltage: The scan tool displays counts which indicates the number of times a low battery voltage level was received.
Key Fob 2 Battery Status: The scan tool displays OK to indicate a good battery voltage level was last received.
Key Fob 3 Low Voltage: The scan tool displays counts which indicates the number of times a low battery voltage level was received.
Key Fob 3 Battery Status: The scan tool displays OK to indicate a good battery voltage level was last received.
Key Fob 4 Low Voltage: The scan tool displays counts which indicates the number of times a low battery voltage level was received.
Key Fob 4 Battery Status: The scan tool displays OK to indicate a good battery voltage level was last received.
Key Pressed on Fob: The scan tool displays Dr. Door Unlock, Door Lock, All Door Unlock, Rear Release, or Alarm indicating which keyless entry transmitter button was last pressed.
Last Fob Used: The scan tool displays Fob 1-Fob 4 which indicates the number of the last keyless entry transmitter used.
Left Side Front Access Panel: The scan tool displays On or Off to indicate the current state of the access panel output driver.
Left Side RearAccess Panel: The scan tool displays On or Off to indicate the current state of the access panel output driver.
Right Side Rear Access Panel: The scan tool displays On or Off to indicate the current state of the access panel output driver.
PROM ID: The scan tool displays a 4 digit number which indicates the ID number of the PROM associated with the module.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.