SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006EXPRESS 2500 V8-6.6L DSL TURBO VIN 2REPAIR AND DIAGNOSISTESTING AND INSPECTIONPROGRAMMING AND RELEARNINGPASSENGER PRESENCE SYSTEM PROGRAMMING AND SETUP
2006 Chevrolet Express 2500 V8-6.6L DSL Turbo VIN 2

Passenger Presence System Programming and Setup

2006 Chevrolet Express 2500 V8-6.6L DSL Turbo VIN 2SECTION Passenger Presence System Programming and Setup


PASSENGER PRESENCE SYSTEM PROGRAMMING AND SETUP

IMPORTANT: Before the passenger presence system (PPS) can be check for preloads the front passenger seat must be completely empty of all items. The presence of any items on the front passenger seat will affect the calibration and operation of the PPS. When the preload test is perform, the instrument panel cluster (IPC) and dash lights will begin dimming on and off. This is normal operation during the rezeroing procedure and does not indicate additional system faults.

If the PPS is replaced or serviced, perform the preload test procedure for the PPS. Refer to Passenger Presence System Preload Test Procedure for the preload test procedure.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.