Scan Tool Data Definitions

2006 Chevrolet Express 2500 V8-6.6L DSL Turbo VIN 2SECTION Scan Tool Data Definitions


SCAN TOOL DATA DEFINITIONS

The body control module (BCM) scan tool data definitions are a brief description of each of the related parameters displayed within the scan tool data display(s) for the BCM.

Left Side Front Access Panel: This data parameter displays the state of the access panel relay. It will display inactive while at rest and active when the BCM is commanding the relay ON.

Left Side Rear Access Panel: This data parameter displays the state of the access panel relay. It will display inactive while at rest and active when the BCM is commanding the relay ON.

Right Side Rear Access Panel: This data parameter displays the state of the access panel relay. It will display inactive while at rest and active when the BCM is commanding the relay ON.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.