HVAC Control Processor - Auxiliary

2006 Chevrolet Express 1500 RWD V6-4.3L VIN XSECTION HVAC Control Processor - Auxiliary


HVAC CONTROL PROCESSOR REPLACEMENT - AUXILIARY

REMOVAL PROCEDURE




1. Lower the front headliner to access the HVAC control processor. Refer to Headliner Replacement - Front in Interior Trim.
2. Remove the HVAC control processor from the roof panel.
3. Remove the HVAC control processor access cover (3).




4. Remove the HVAC control processor (2) from the HVAC processor case (1).

INSTALLATION PROCEDURE




1. Install the HVAC control processor (2) to the HVAC processor case (1).




2. Install the HVAC control processor access cover (3).
3. Install the HVAC control processor to the roof panel.
4. Install the front headliner.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.