Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2005OPTRA (CANADA) L4-2.0LREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINAPPLICATION AND ID
2005 Chevrolet Optra (CANADA) L4-2.0L
Transmission and Drivetrain: Application and ID
2005 Chevrolet Optra (CANADA) L4-2.0LSECTION Application and ID
Transmission ID and VIN Derivative Location
Manual Transaxle Identification Number Location
The manual transaxle identification number is attached to the top of the transmission case near the engine.
Manual Transmission Identification Number Derivative
1. Identification Code
2. Sequential Number
Automatic Transaxle Identification Number Location (ZF 4HP16)
The automatic transaxle identification number plate is attached on the rear bottom side of the transaxle case near the bulk head.
Automatic Transmission Identification Number Derivative (ZF 4HP16)
1. Part Number
2. Serial Number
3. Model Code
4. Manufactured Nation and Company
Automatic Transmission Identification Number Location (Aisin 81-40LE)
The automatic transaxle identification number plate is attached on the upper side of the transaxle case.
Automatic Transmission Identification Number Derivative (Aisin 81-40LE)
1. Lot Number
2. Part ID Code
3. Part Number
4. Serial Number
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.