Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2005EQUINOX FWD V6-3.4L VIN FREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSPOWERTRAIN MANAGEMENTIGNITION SYSTEMSPARK PLUG
2005 Chevrolet Equinox FWD V6-3.4L VIN F
Spark Plug
2005 Chevrolet Equinox FWD V6-3.4L VIN FSECTION Spark Plug
Spark Plug Torque 15 Nm (11.0 lb ft)
Spark Plug Gap 1.52 mm (0.060 in)
NEW cylinder head, the FIRST time the spark plugs are installed, tighten the spark plugs to 20 N.m (15 lb ft). All subsequent tightening of the spark plugs, tighten to 15 N.m (11 lb ft).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.