Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2005EQUINOX FWD V6-3.4L VIN FREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYPISTON, ENGINE
2005 Chevrolet Equinox FWD V6-3.4L VIN F
Piston, Engine
2005 Chevrolet Equinox FWD V6-3.4L VIN FSECTION Piston, Engine
Piston
Piston Diameter - production - cylinder 1-4 91.985-92.003 mm (3.621-3.622 inch)
Piston Diameter - service limit - cylinder 1-4 91.945 mm (3.619 inch)
Piston Diameter - production - cylinder 5-6 91.99-92.028 mm (3.621-3.623 inch)
Piston Diameter - service limit - cylinder 5-6 91.945 mm (3.619 inch)
Piston Pin Bore Diameter 23.005-23.010 mm (0.9057-0.9059 inch) Piston Ring Groove Width - First 1.23-1.25 mm (0.048-0.049 inch)
Piston Ring Groove Width - Second 1.53-1.55 mm (0.060-0.061 inch)
Piston Ring Groove Width - Oil Control 3.03-3.055 mm (0.119-0.120 inch)
Piston to Bore Clearance - production - 1-4 0.17-0.053 mm (0.0006-0.0020 inch)
Piston to Bore Clearance - service limit- 1-4 0.093 mm (0.0036 inch)
Piston to Bore Clearance - production - 5-6 -0.008-0.048 mm (-0.0003-0.0018 inch)
Piston to Bore Clearance - service limit- 5-6 0.093 mm (0.0036 inch)Pin
Piston Pin Clearance to Connecting Rod Bore - Press Fit -0.047 to -0.019 mm (-0.0019 to -0.0007 inch)
Piston Pin Clearance to Piston Pin Bore 0.008-0.016 mm (0.00031-0.00063 inch)
Piston Pin Diameter 22.994-22.997 mm (0.9053-0.9054 inch)
Piston Diameter - production - cylinder 1-4 91.985-92.003 mm (3.621-3.622 inch)
Piston Diameter - service limit - cylinder 1-4 91.945 mm (3.619 inch)
Piston Diameter - production - cylinder 5-6 91.99-92.028 mm (3.621-3.623 inch)
Piston Diameter - service limit - cylinder 5-6 91.945 mm (3.619 inch)
Piston Pin Bore Diameter 23.005-23.010 mm (0.9057-0.9059 inch) Piston Ring Groove Width - First 1.23-1.25 mm (0.048-0.049 inch)
Piston Ring Groove Width - Second 1.53-1.55 mm (0.060-0.061 inch)
Piston Ring Groove Width - Oil Control 3.03-3.055 mm (0.119-0.120 inch)
Piston to Bore Clearance - production - 1-4 0.17-0.053 mm (0.0006-0.0020 inch)
Piston to Bore Clearance - service limit- 1-4 0.093 mm (0.0036 inch)
Piston to Bore Clearance - production - 5-6 -0.008-0.048 mm (-0.0003-0.0018 inch)
Piston to Bore Clearance - service limit- 5-6 0.093 mm (0.0036 inch)Pin
Piston Pin Clearance to Connecting Rod Bore - Press Fit -0.047 to -0.019 mm (-0.0019 to -0.0007 inch)
Piston Pin Clearance to Piston Pin Bore 0.008-0.016 mm (0.00031-0.00063 inch)
Piston Pin Diameter 22.994-22.997 mm (0.9053-0.9054 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.