Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2005EQUINOX FWD V6-3.4L VIN FREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYPISTON RING, ENGINE
2005 Chevrolet Equinox FWD V6-3.4L VIN F
Piston Ring, Engine
2005 Chevrolet Equinox FWD V6-3.4L VIN FSECTION Piston Ring, Engine
Piston Ring End Gap
First Compression Ring 0.15-0.36 mm (0.006-0.014 inch)
Second Compression Ring 0.48-0.74 mm (0.0188-0.0291 inch)
Oil Control Ring 0.25-0.77 mm (0.0098-0.0303 inch)
Piston Ring to Groove Clearance
First Compression Ring 0.04-0.086 mm (0.002-0.0033 inch)
Second Compression Ring 0.04-0.08 mm (0.002-0.0031 inch)
Oil Control Ring 0.07-0.095 mm (0.0028-0.0037 inch)
Piston Ring Thickness
First Compression Ring 1.164-1.190 mm (0.046-0.047 inch)
Second Compression Ring 1.460-1.490 mm (0.0574-0.0586 inch)
Oil Control Ring - Maximum 2.960 mm (0.116 inch)
First Compression Ring 0.15-0.36 mm (0.006-0.014 inch)
Second Compression Ring 0.48-0.74 mm (0.0188-0.0291 inch)
Oil Control Ring 0.25-0.77 mm (0.0098-0.0303 inch)
Piston Ring to Groove Clearance
First Compression Ring 0.04-0.086 mm (0.002-0.0033 inch)
Second Compression Ring 0.04-0.08 mm (0.002-0.0031 inch)
Oil Control Ring 0.07-0.095 mm (0.0028-0.0037 inch)
Piston Ring Thickness
First Compression Ring 1.164-1.190 mm (0.046-0.047 inch)
Second Compression Ring 1.460-1.490 mm (0.0574-0.0586 inch)
Oil Control Ring - Maximum 2.960 mm (0.116 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.