Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2005EQUINOX FWD V6-3.4L VIN FREPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGCOMPRESSOR HVACSERVICE AND REPAIRCOMPRESSOR MOUNTING BRACKET REPLACEMENT
2005 Chevrolet Equinox FWD V6-3.4L VIN F
Compressor Mounting Bracket Replacement
2005 Chevrolet Equinox FWD V6-3.4L VIN FSECTION Compressor Mounting Bracket Replacement
COMPRESSOR MOUNTING BRACKET REPLACEMENT
REMOVAL PROCEDURE
1. Remove the compressor from the vehicle.
2. Remove the compressor mounting bracket bolts (1, 2, and 3) from the engine.
3. Remove the compressor mounting bracket from the engine.
INSTALLATION PROCEDURE
1. Install the compressor mounting bracket to the engine.
2. Install the compressor mounting bracket bolts (1, 2, and 3) to the engine.
Tighten the bolts (1, 2, and 3) in sequence, to 50 N.m (37 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the compressor to the vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.