Differential Assembly

2005 Chevrolet Equinox FWD V6-3.4L VIN FSECTION Differential Assembly


Rear Axle Disassembled Views

Rear Axle Disassembled Views:





1 - Nut
2 - Input Flange
3 - Dust Shield
4 - Oil Seal
5 - Drain Plug
6 - Plug
7 - Bolt
8 - Shield
9 - Bolt
10 - Clutch Cover
11 - Bearing
12 - Snap Ring
13 - Seal
14 - Clutch Drum
15 - Pinion Nut
16 - Bearing
17 - Cup
18 - Seal
19 - Filter
20 - Mount
21 - Axle Seals
22 - Hollow Dowel
23 - Differential Carrier
24 - Cup
25 - Collapsible Spacer
26 - Bearing
27 - Shim
28 - Pinion Gear
29 - Shim
30 - Cup
31 - Differential Carrier Assembly
32 - Cover
33 - Bolt
34 - Fill Plug
35 - Vent
36 - Nut
37 - Bracket
38 - Bolt

Differential Carrier Components

Differential Carrier Components:





1 - Bearing
1 - Bearing
2 - Bolt
3 - Pinion Shaft Pin
4 - Differential Case
5 - Pinion Shaft Lock Pin
6 - Ring Gear
7 - Washer
7 - Washer
8 - Axle Side Gear
8 - Axle Side Gear
9 - Washer
9 - Washer
10 - Pinion Gears
10 - Pinion Gears
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.