No. 2 Rear Control Valve Body Assembly

2005 Chevrolet Equinox FWD V6-3.4L VIN FSECTION No. 2 Rear Control Valve Body Assembly
No. 2 Rear Control Valve Body Assembly

No. 2 Rear Control Valve Body Assembly:





353 - Accumulator Check Valve Assembly (2)
353 - Accumulator Check Valve Assembly (2)
445 - No. 2 Rear Control Valve Body
446 - 2nd Clutch (B2) Control Valve
447 - 2nd Clutch (B2) Control Valve Spring - Natural Color
448 - 2nd Clutch (B2) Control Valve Plug
449 - TCC Check Valve Spring - Light Blue
450 - TCC Check Valve
451 - Reverse Shift Restrict Ball Check Valve Bushing - Inner
452 - Reverse Shift Restrict Ball Check Valve
453 - Reverse Shift Restrict Ball Check Valve Bushing - Outer
454 - Lock Up Control Valve
455 - Lock Up Control Valve Plunger
456 - Lock Up Control Valve Spring - Yellow
457 - Lock Up Control Valve Sleeve
458 - Sleeve/Bore Plug Retainer (3.2 x 5 x 21.2)
459 - Sleeve/Bore Plug Retainer (3.2 x 5 x 15) (2)
459 - Sleeve/Bore Plug Retainer (3.2 x 5 x 15) (2)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.