Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2005BLAZER 4WD V6-4.3L VIN XREPAIR AND DIAGNOSISTESTING AND INSPECTIONPROGRAMMING AND RELEARNINGVEHICLE PERSONALIZATIONDRIVER PERSONALIZATION
2005 Chevrolet Blazer 4WD V6-4.3L VIN X
Driver Personalization
2005 Chevrolet Blazer 4WD V6-4.3L VIN XSECTION Driver Personalization
DRIVER PERSONALIZATION
MEMORY SEAT PROGRAMMING
Perform the following actions in order to program the memory seats for 2 separate drivers:
1. Move the seat to the desired position.
2. Press the memory set switch. A chime should be heard.
3. Press the correct memory seat button for the specific driver within five seconds after pressing the memory set switch. A chime should be heard.
4. Repeat the steps for the second driver.
ADDITIONAL INFORMATION
For more information on memory seats, refer to Memory Seats Description and Operation in Seats.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.