Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2004TAHOE 4WD V8-4.8L VIN VREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEOIL PUMP, ENGINE
2004 Chevrolet Tahoe 4WD V8-4.8L VIN V
Oil Pump, Engine
2004 Chevrolet Tahoe 4WD V8-4.8L VIN VSECTION Oil Pump, Engine
Oil Pump-to-Engine Block Bolts 25 Nm (18 ft. lbs.)
Oil Pump Cover Bolts 12 Nm (106 inch lbs.)
Oil Pump Relief Valve Plug 12 Nm (106 inch lbs.)
Oil Pump Screen Nuts 25 Nm (18 ft. lbs.)
Oil Pump Screen-to-Oil Pump Bolt 12 Nm (106 inch lbs.)
Oil Pump Cover Bolts 12 Nm (106 inch lbs.)
Oil Pump Relief Valve Plug 12 Nm (106 inch lbs.)
Oil Pump Screen Nuts 25 Nm (18 ft. lbs.)
Oil Pump Screen-to-Oil Pump Bolt 12 Nm (106 inch lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.