Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2004TAHOE 4WD V8-4.8L VIN VREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSDATA LINK CONNECTORSERVICE AND REPAIR
2004 Chevrolet Tahoe 4WD V8-4.8L VIN V
Data Link Connector: Service and Repair
2004 Chevrolet Tahoe 4WD V8-4.8L VIN VSECTION Service and Repair
DATA LINK CONNECTOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the bolt from the data link connector.
2. Remove the data link connector from the instrument panel.
INSTALLATION PROCEDURE
1. Install the data link connector to the instrument panel.
2. Install the data link connector bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolt to 6 N.m (53 lb in).
REMOVAL PROCEDURE
1. Remove the bolt from the data link connector.
2. Remove the data link connector from the instrument panel.
INSTALLATION PROCEDURE
1. Install the data link connector to the instrument panel.
2. Install the data link connector bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolt to 6 N.m (53 lb in).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.