Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2004MONTE CARLO V6-3.8L VIN KREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSFUEL TANK PRESSURE SENSORSERVICE AND REPAIR
2004 Chevrolet Monte Carlo V6-3.8L VIN K
Fuel Tank Pressure Sensor: Service and Repair
2004 Chevrolet Monte Carlo V6-3.8L VIN KSECTION Service and Repair
FUEL TANK PRESSURE SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the fuel tank pressure sensor (7) from the fuel sender assembly (1).
2. Disconnect the negative battery cable.
3. Remove the fuel sender assembly.
INSTALLATION PROCEDURE
1. Install the new fuel tank pressure sensor (7) to the fuel sender assembly (1).
2. Install the fuel sender assembly.
3. Connect the negative battery cable.
REMOVAL PROCEDURE
1. Remove the fuel tank pressure sensor (7) from the fuel sender assembly (1).
2. Disconnect the negative battery cable.
3. Remove the fuel sender assembly.
INSTALLATION PROCEDURE
1. Install the new fuel tank pressure sensor (7) to the fuel sender assembly (1).
2. Install the fuel sender assembly.
3. Connect the negative battery cable.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.