Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2004MONTE CARLO V6-3.4L VIN EREPAIR AND DIAGNOSISSPECIFICATIONSCAPACITY SPECIFICATIONSAUTOMATIC TRANSMISSION/TRANSAXLESYSTEM SPECIFICATIONS
2004 Chevrolet Monte Carlo V6-3.4L VIN E
System Specifications
2004 Chevrolet Monte Carlo V6-3.4L VIN ESECTION System Specifications
AUTOMATIC TRANSAXLE
Pan Removal 7.0 liters (7.4 quarts)
Complete Overhaul 9.5 liters (10.0 quarts)
Dry 12.7 liters (13.4 quarts)
IMPORTANT: When draining/replacing the converter, more fluid will be needed.
NOTE: ALL capacity specifications are approximate. When replacing or adding fluids, fill to the recommended level and recheck fluid level.
Pan Removal 7.0 liters (7.4 quarts)
Complete Overhaul 9.5 liters (10.0 quarts)
Dry 12.7 liters (13.4 quarts)
IMPORTANT: When draining/replacing the converter, more fluid will be needed.
NOTE: ALL capacity specifications are approximate. When replacing or adding fluids, fill to the recommended level and recheck fluid level.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.