Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2004MALIBU V6-3.5L VIN 8REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSBRAKES AND TRACTION CONTROLSYSTEM SPECIFICATIONSTORQUE SPECIFICATIONS
2004 Chevrolet Malibu V6-3.5L VIN 8
Torque Specifications
2004 Chevrolet Malibu V6-3.5L VIN 8SECTION Torque Specifications
Fastener Tightening Specifications
Brake Caliper Bleeder Valve 11 Nm (97 inch lbs.)
Brake Caliper Guide Pin Bolt 35 Nm (26 ft. lbs.)
Brake Caliper Mounting Bracket Bolt 115 Nm (85 ft. lbs.)
Front Brake Hose-to-Brake Caliper Bolt 50 Nm (37 ft. lbs.)
Rear Brake Hose-to-Brake Caliper Bolt 50 Nm (37 ft. lbs.)
Brake Caliper Bleeder Valve 11 Nm (97 inch lbs.)
Brake Caliper Guide Pin Bolt 35 Nm (26 ft. lbs.)
Brake Caliper Mounting Bracket Bolt 115 Nm (85 ft. lbs.)
Front Brake Hose-to-Brake Caliper Bolt 50 Nm (37 ft. lbs.)
Rear Brake Hose-to-Brake Caliper Bolt 50 Nm (37 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.