Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2004EXPRESS 2500 2WD V8-6.0L VIN UREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSROD BEARING CAP TORQUE
2004 Chevrolet Express 2500 2WD V8-6.0L VIN U
Rod Bearing Cap Torque
2004 Chevrolet Express 2500 2WD V8-6.0L VIN USECTION Rod Bearing Cap Torque
The contents of this article have been updated by TSB # 07-06-01-002 dated 3/5/2007.
Connecting Rod Bolts (First Pass) 20 Nm (15 lb ft)
Connecting Rod Bolts (Final Pass) 85 degrees
Connecting Rod Bolts (First Pass) 20 Nm (15 lb ft)
Connecting Rod Bolts (Final Pass) 85 degrees
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.