Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2004EXPRESS 1500 RWD V6-4.3L VIN XREPAIR AND DIAGNOSISCRUISE CONTROLCRUISE CONTROL SERVO CABLEADJUSTMENTS
2004 Chevrolet Express 1500 RWD V6-4.3L VIN X
Cruise Control Servo Cable: Adjustments
2004 Chevrolet Express 1500 RWD V6-4.3L VIN XSECTION Adjustments
CRUISE CONTROL CABLE ADJUSTMENT
The cruise control cable lash should be automatically set within 0.0-4.0 mm (0.0-0.2 in) when the cable is installed. If an adjustment is necessary, use the following procedure:
1. Twist the cruise control cable connector screw end clockwise or counterclockwise until the lash is within specifications.
2. Allow the throttle lever to return to the idle position.
The cruise control cable lash should be automatically set within 0.0-4.0 mm (0.0-0.2 in) when the cable is installed. If an adjustment is necessary, use the following procedure:
1. Twist the cruise control cable connector screw end clockwise or counterclockwise until the lash is within specifications.
2. Allow the throttle lever to return to the idle position.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.