Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2003MONTE CARLO V6-3.4L VIN EREPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTGLOBAL POSITIONING SYSTEMTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESSCAN TOOL DATA DEFINITIONS
2003 Chevrolet Monte Carlo V6-3.4L VIN E
Scan Tool Data Definitions
2003 Chevrolet Monte Carlo V6-3.4L VIN ESECTION Scan Tool Data Definitions
SCAN TOOL DATA DEFINITIONS
Module Information - Software Version: This displays the 3-digit number of the software version used on the OnStar(R) VCIM.
Module Information Hardware Version: This displays the 1-digit number of the hardware version used on the OnStar(R) vehicle communication interface module (VCIM).
Module Information - Julian Date Of Build: This displays the day of the year the module was built.
Module Information - Year Module Built: This displays the year the module was built.
Module Information - 8-Digit GM Part Number: This displays the part number for the VCIM.
Module Information - Component Serial #8: This is the first partition of the serial number.
Module Information - Component Serial #12: This is the second partition of the serial number.
Module Information - Component Serial #13: This is the third partition of the serial number.
VCI Module Station Identification Number (STID): This is the station identification number stored in the VCIM which is used by the OnStar(R) Call Center.
Module ID: This displays the version of OnStar(R) which the vehicle is equipped with.
Electronic Serial Number (ESN): This is the electronic serial number stored in the VCIM which is used by the OnStar(R) Call Center
Module Information - Software Version: This displays the 3-digit number of the software version used on the OnStar(R) VCIM.
Module Information Hardware Version: This displays the 1-digit number of the hardware version used on the OnStar(R) vehicle communication interface module (VCIM).
Module Information - Julian Date Of Build: This displays the day of the year the module was built.
Module Information - Year Module Built: This displays the year the module was built.
Module Information - 8-Digit GM Part Number: This displays the part number for the VCIM.
Module Information - Component Serial #8: This is the first partition of the serial number.
Module Information - Component Serial #12: This is the second partition of the serial number.
Module Information - Component Serial #13: This is the third partition of the serial number.
VCI Module Station Identification Number (STID): This is the station identification number stored in the VCIM which is used by the OnStar(R) Call Center.
Module ID: This displays the version of OnStar(R) which the vehicle is equipped with.
Electronic Serial Number (ESN): This is the electronic serial number stored in the VCIM which is used by the OnStar(R) Call Center
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.