Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2002MONTE CARLO V6-3.8L VIN KREPAIR AND DIAGNOSISTESTING AND INSPECTIONPROGRAMMING AND RELEARNINGVEHICLE PERSONALIZATIONPROGRAMMING FEATURES - WITH TECH 2HORN CHIRP MODE
2002 Chevrolet Monte Carlo V6-3.8L VIN K
Horn Chirp Mode
2002 Chevrolet Monte Carlo V6-3.8L VIN KSECTION Horn Chirp Mode
Continue with the following steps in order to program the Horn Chirp Mode.
1. Select Set Options.
2. Select F7 for Horn Chirp Mode.
3. Highlight the desired mode for the following choices:
^ Short Chirp
^ Long Chirp
4. Press the ENTER button to turn the mode ON or OFF. (You must turn the current mode OFF before you can turn another one ON.)
5. Select Save Options.
6. Exit the menu.
1. Select Set Options.
2. Select F7 for Horn Chirp Mode.
3. Highlight the desired mode for the following choices:
^ Short Chirp
^ Long Chirp
4. Press the ENTER button to turn the mode ON or OFF. (You must turn the current mode OFF before you can turn another one ON.)
5. Select Save Options.
6. Exit the menu.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.