Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2002MONTE CARLO V6-3.4L VIN EREPAIR AND DIAGNOSISTESTING AND INSPECTIONPROGRAMMING AND RELEARNINGVEHICLE PERSONALIZATIONPROGRAMMING FEATURES - REMOTE ACTIVATION VERIFICATION
2002 Chevrolet Monte Carlo V6-3.4L VIN E
Programming Features - Remote Activation Verification
2002 Chevrolet Monte Carlo V6-3.4L VIN ESECTION Programming Features - Remote Activation Verification
Continue with the following steps in order to personalize the remote activation verification feature:
1. Scroll through the menu, using the SEEK button, until FOBLIGHT is displayed.
2. Press the DISP button to enter the menu.
3. Press the PREV or NEXT button to scroll through the following options:
^ OFF
^ ON
4. Press the DISP button in order to choose the desired option. A chime will sound to verify the setting.
5. Exit to the MAIN MENU.
6. Scroll through the menu, using the SEEK button, until FOBHORN is displayed.
7. Press the DISP button to enter the menu.
8. Press the PREV or NEXT button to scroll through the following options:
^ OFF
^ PARTIAL
^ FULL
9. Press the DISP button in order to choose the desired option. A chime will sound to verify the setting.
1. Scroll through the menu, using the SEEK button, until FOBLIGHT is displayed.
2. Press the DISP button to enter the menu.
3. Press the PREV or NEXT button to scroll through the following options:
^ OFF
^ ON
4. Press the DISP button in order to choose the desired option. A chime will sound to verify the setting.
5. Exit to the MAIN MENU.
6. Scroll through the menu, using the SEEK button, until FOBHORN is displayed.
7. Press the DISP button to enter the menu.
8. Press the PREV or NEXT button to scroll through the following options:
^ OFF
^ PARTIAL
^ FULL
9. Press the DISP button in order to choose the desired option. A chime will sound to verify the setting.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.