Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2002MONTE CARLO V6-3.4L VIN EREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSEXHAUST SYSTEMSYSTEM SPECIFICATIONS
2002 Chevrolet Monte Carlo V6-3.4L VIN E
System Specifications
2002 Chevrolet Monte Carlo V6-3.4L VIN ESECTION System Specifications
| Catalytic Converter Nut | 25 ft. lbs. |
| Engine Lift Bracket Bolt Nut | 22 ft. lbs. |
| Exhaust Crossover Pipe Heat Shield Bolt | 89 inch lbs. |
| Exhaust Crossover Pipe Heat Shield Nut | 15 ft. lbs. |
| Exhaust Crossover Pipe Nut | 18 ft. lbs. |
| Exhaust Manifold Heat Shield Bolt | 89 inch lbs. |
| Exhaust Manifold Nut | 12 ft. lbs. |
| Exhaust Manifold Pipe Stud Nut | 24 ft. lbs. |
| Exhaust Pipe Rear Hanger Bolt | 18 ft. lbs. |
| Fuel Injector Sight Shield Bracket Nut | 22 ft. lbs. |
| Rear Bumper Impact Bar Bolt | 18 ft. lbs. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.