Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2002EXPRESS 1/2 TON VAN V8-5.7L VIN RREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTPROM - PROGRAMMABLE READ ONLY MEMORYTECHNICAL SERVICE BULLETINSENGINE CONTROLS - NON-GM ENGINE/TRANSMISSION CALIBRATION IDSECTIONSSECTION 7
2002 Chevrolet Express 1/2 Ton Van V8-5.7L VIN R
Section 7
2002 Chevrolet Express 1/2 Ton Van V8-5.7L VIN RSECTION Section 7
7. Creating a JPEG (.jpg) File From a GDS 2 Calibration History Screen Shot Using Microsoft Paint
1. Select: Start icon.
2. Select: All Programs.
3. Select: Accessories.
4. Select: Paint.
5. Navigate to: Calibration History.
6. Press the: Print Scrn button.
7. Open: Microsoft Paint.
8. Select: Paste.
9. Select: Save As.
10. Select: Desktop.
11. Select: File name. Name the file. As an example use the VIN.
12. Select: Save as type, using the drop down menu.
13. Select: JPEG
1. Select: Start icon.
2. Select: All Programs.
3. Select: Accessories.
4. Select: Paint.
5. Navigate to: Calibration History.
6. Press the: Print Scrn button.
7. Open: Microsoft Paint.
8. Select: Paste.
9. Select: Save As.
10. Select: Desktop.
11. Select: File name. Name the file. As an example use the VIN.
12. Select: Save as type, using the drop down menu.
13. Select: JPEG
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.