Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2002EXPRESS 1/2 TON VAN V6-4.3L VIN WREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEENGINE MOUNT
2002 Chevrolet Express 1/2 Ton Van V6-4.3L VIN W
Engine Mount
2002 Chevrolet Express 1/2 Ton Van V6-4.3L VIN WSECTION Engine Mount
Engine Mount Bolt to Engine Mount Bracket - Frame Side 58 Nm (43 ft. lbs.)
Engine Mount Bracket Bolt to Engine 54 Nm (40 ft. lbs).
Engine Mount Bracket Bolt to Frame 45 Nm (33 ft. lbs.)
Engine Mount Bracket Nut to Engine Mount Bracket Bolt - Through-bolt 68 Nm (50 ft. lbs.)
Engine Mount Heat Shield Bolt 6 Nm (53 inch lbs.)
Engine Mount Bracket Bolt to Engine 54 Nm (40 ft. lbs).
Engine Mount Bracket Bolt to Frame 45 Nm (33 ft. lbs.)
Engine Mount Bracket Nut to Engine Mount Bracket Bolt - Through-bolt 68 Nm (50 ft. lbs.)
Engine Mount Heat Shield Bolt 6 Nm (53 inch lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.