Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2002EXPRESS 1 TON VAN V8-8.1L VIN GREPAIR AND DIAGNOSISMAINTENANCEALIGNMENTSPECIFICATIONS
2002 Chevrolet Express 1 Ton Van V8-8.1L VIN G
Alignment: Specifications
2002 Chevrolet Express 1 Ton Van V8-8.1L VIN GSECTION Specifications
| Caster | Service Allowable | 3.75 +/- 1.0 | |
| Service Preferred | 3.75 | ||
| Cross Caster (L-R) | Service Allowable | 0.00 +/- 0.50 | |
| Service Preferred | 0.00 | ||
| Camber | Service Allowable | 0.50 +/- 0.60 | |
| Service Preferred | 0.50 | ||
| Cross Camber (L-R) | Service Allowable | 0.00 +/- 0.50 | |
| Service Preferred | 0.00 | ||
| Steering Wheel Angle | Service Allowable | -0.40 +/- 3.0 | |
| Service Preferred | -0.40 | ||
| Total Toe | Service Allowable | 0.24 +/- 0.20 | |
| Service Preferred | 0.24 | ||
| Front Ride Height | All vehicles | Service Checking | 3.74 in. |
| Service Setting | 3.74 in +/- 0.236 in. | ||
| Side to Side Tolerance | 0.5 in. | ||
| With Auxiliary Springs | Service Checking | 5.25 in +/- 0.5 in. | |
| Service Setting | 5.25 in. +/- 0.5 in. | ||
| Side to Side Tolerance | 0.5 in. | ||
| Without Auxiliary Springs | Service Checking | 4.25 in +/- 0.5 in. | |
| Service Setting | 4.25 in. +/- 0.5 in. | ||
| Side to Side Tolerance | 0.5 in. | ||
| Rear Ride Height | With Auxiliary Springs | Service Checking | 5.25 in. +/- 0.5 in. |
| Service Setting | 5.25 in. +/- 0.5 in. | ||
| Side to Side Tolerance | 0.5 in. | ||
| Without Auxiliary Springs | Service Checking | 4.25 in. +/- 0.5 in. | |
| Service Setting | 4.25 in. +/- 0.5 in. | ||
| Side to Side Tolerance | 0.5 in. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.