Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001MONTE CARLO V6-3.8L VIN KREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSENGINE BLOCK SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONSOIL PUMP TORQUE/DATA SPECIFICATIONS
2001 Chevrolet Monte Carlo V6-3.8L VIN K
Oil Pump Torque/Data Specifications
2001 Chevrolet Monte Carlo V6-3.8L VIN KSECTION Oil Pump Torque/Data Specifications
| Gear pocket depth | 0.461-0.4625 Inch (in) |
| Gear Pocket Diameter | 3.508-3.512 Inch (in) |
| Inner Gear Tip Clearance | 0.006 Inch (in) |
| Outer Gear Diameter Clearance | 0.008-0.015 Inch (in) |
| End Clearance | 0.001-0.0035 Inch (in) |
| Valve-to-Bore Clearance | 0.0015-0.003 Inch (in) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.