Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001MONTE CARLO V6-3.4L VIN EREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSOIL PUMP TORQUE/DATA SPECIFICATIONS
2001 Chevrolet Monte Carlo V6-3.4L VIN E
Oil Pump Torque/Data Specifications
2001 Chevrolet Monte Carlo V6-3.4L VIN ESECTION Oil Pump Torque/Data Specifications
| Gear Lash | 0.0037-0.0077 in | |
| Gear Pocket Depth | 1.202-1.204 Inch (in) | |
| Gear Pocket Diameter | 1.503-1.505 Inch (in) | |
| Oil Pump Gear | Length | 1.199-1.200 in |
| Diameter | 1.498-1.500 Inch (in) | |
| Side Clearance | 0.001-0.003 Inch (in) | |
| End Clearance | 0.002-0.005 Inch (in) | |
| Valve to Bore Clearance | 0.0015-0.0035 Inch (in) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.