Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001MONTE CARLO V6-3.4L VIN EREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESSCAN TOOL DATA, NORMAL VALUES AND DEFINITIONSSCAN TOOL DATA DEFINITIONS - POWERTRAIN SYSTEMSVTD FUEL DISABLE
2001 Chevrolet Monte Carlo V6-3.4L VIN E
VTD Fuel Disable
2001 Chevrolet Monte Carlo V6-3.4L VIN ESECTION VTD Fuel Disable
The scan tool displays ACTIVE or INACTIVE. If applicable, the theft deterrent fuel enable is an input from the vehicle theft deterrent system that signals the PCM in order to enable the injectors and the crank relay if the proper signal is received. The scan tool will normally display INACTIVE. If the vehicle theft deterrent system does not send the correct theft deterrent fuel enable signal to the PCM, the display will switch to ACTIVE and the fuel system and starter control may be disabled. Refer to vehicle theft deterrent diagnosis for further information.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.