Trip

Technically, a trip is a key on-run-key off cycle in which all the enable criteria for a given diagnostic are met, allowing the diagnostic to run. Unfortunately, this concept is not quite that simple. A trip is official when all the enable criteria for a given diagnostic are met. Because the enable criteria vary from one diagnostic to another, the definition of a trip varies as well. Some diagnostics are run when the vehicle is at operating temperature. Some diagnostics are run when the vehicle first starts up. Some diagnostics require that the vehicle is cruising at a steady highway speed. Some diagnostics run only when the vehicle is at idle. Some diagnostics function with the torque converter clutch disabled. Some diagnostics run only immediately following a cold engine start-up.

A trip then, is defined as a key on-run-key off cycle in which the vehicle was operated in such a way as to satisfy the enable criteria for a given diagnostic. This diagnostic will consider this cycle to be one trip. However, another diagnostic with a different set of enable criteria (which were not met) during this driving event, would not consider it a trip. No trip will occur for that particular diagnostic until the vehicle is driven in such a way as to meet all the enable criteria.