SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001METRO L4-079 1.3L VIN 2 MFIREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSFUEL TANK PRESSURE SENSORSERVICE AND REPAIR
2001 Chevrolet Metro L4-079 1.3L VIN 2 MFI

Fuel Tank Pressure Sensor: Service and Repair

2001 Chevrolet Metro L4-079 1.3L VIN 2 MFISECTION Service and Repair




REMOVAL PROCEDURE
1. Remove the fuel tank from the vehicle.
2. Disconnect the electrical connector from the fuel tank pressure sensor.
3. Remove the 2 bolts (1) from the fuel tank pressure sensor.
4. Remove the fuel tank pressure sensor from the fuel tank.

INSTALLATION PROCEDURE

IMPORTANT: Install the fuel tank pressure sensor onto the fuel tank with the sensor terminals facing the fuel level sensor side.

1. Install the fuel tank pressure sensor to the fuel tank.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Secure the fuel tank pressure sensor with the 2 bolts (1).

Tighten
Tighten the bolts to 1.2-2.0 N.m (11-18 lb in).

3. Connect the electrical connector to the fuel tank pressure sensor.
4. Install the fuel tank to the vehicle.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.