Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001LUMINA V6-3.1L VIN JREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSDESCRIPTION AND OPERATIONSYSTEM OPERATIONPOWERTRAIN CONTROL MODULE (PCM)POWERTRAIN
2001 Chevrolet Lumina V6-3.1L VIN J
Powertrain
2001 Chevrolet Lumina V6-3.1L VIN JSECTION Powertrain
The powertrain used in this vehicle consists of a 3.1L pushrod V6 engine mated to a 4T65-E electronically controlled transaxle. Refer to Engine Component Description in Engine Mechanical for more information on the powertrain. The powertrain has electronic controls to reduce exhaust emissions while maintaining excellent driveability and fuel economy. The Powertrain Control Module (PCM) is the essence of this control system.
The PCM is designed to maintain exhaust emission levels to Federal/California/other standards while providing excellent driveability and fuel efficiency. Review the components and wiring diagrams in order to determine which systems are controlled by the PCM. The PCM monitors numerous engine and vehicle functions. The following are some of the functions that the PCM controls:
^ The engine fueling
^ The Ignition Control (IC)
^ The Knock Sensor (KS) system
^ The Evaporative Emissions (EVAP) system
^ The Secondary Air Injection (AIR) system (if equipped)
^ The Exhaust Gas Recirculation (EGR) system
^ The automatic transmission functions
^ The generator
^ The A/C clutch control
^ The cooling fan control
The PCM is designed to maintain exhaust emission levels to Federal/California/other standards while providing excellent driveability and fuel efficiency. Review the components and wiring diagrams in order to determine which systems are controlled by the PCM. The PCM monitors numerous engine and vehicle functions. The following are some of the functions that the PCM controls:
^ The engine fueling
^ The Ignition Control (IC)
^ The Knock Sensor (KS) system
^ The Evaporative Emissions (EVAP) system
^ The Secondary Air Injection (AIR) system (if equipped)
^ The Exhaust Gas Recirculation (EGR) system
^ The automatic transmission functions
^ The generator
^ The A/C clutch control
^ The cooling fan control
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.