Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001LUMINA V6-3.1L VIN JREPAIR AND DIAGNOSISCRUISE CONTROLDESCRIPTION AND OPERATIONCRUISE CONTROL SYSTEM DESCRIPTIONCRUISE CONTROL MODULE
2001 Chevrolet Lumina V6-3.1L VIN J
Cruise Control Module
2001 Chevrolet Lumina V6-3.1L VIN JSECTION Cruise Control Module
The cruise control system uses a cruise control module to obtain and hold any desired vehicle cruise speed above a minimum speed of 40 km/h (25 mph). The module contains the following 2 components:
^ An electronic controller
The electronic controller monitors the following operations:
- The vehicle speed
- The multi-function turn signal lever
- The cruise control release inputs
- The brake switch inputs
- Operates the electric stepper motor
^ A stepper motor
The stepper motor moves the internal band in response to the controller in order to maintain the desired cruise speed. The internal band is linked to the throttle lever via the cruise control cable.
^ An electronic controller
The electronic controller monitors the following operations:
- The vehicle speed
- The multi-function turn signal lever
- The cruise control release inputs
- The brake switch inputs
- Operates the electric stepper motor
^ A stepper motor
The stepper motor moves the internal band in response to the controller in order to maintain the desired cruise speed. The internal band is linked to the throttle lever via the cruise control cable.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.