Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2000S10/T10 P/U 2WD V6-4.3L VIN WREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSGENERAL ENGINE SPECIFICATIONS
2000 Chevrolet S10/T10 P/U 2WD V6-4.3L VIN W
General Engine Specifications
2000 Chevrolet S10/T10 P/U 2WD V6-4.3L VIN WSECTION General Engine Specifications
| Battery Negative Cable Bolt to Engine | 13 |
| Engine Wiring Harness Bracket Bolt to Generator and Drive Belt Tensioner Bracket | 18 |
| Engine Wiring Harness Bracket Bolt to Rear of Cylinder Head | 26 |
| Engine Wiring Harness Bracket Nut to Intake Manifold | 106 |
| Ground Wire or Strap Bolt to Rear of Cylinder Head | 26 |
| Engine Type | V6 |
| Regular Production Option (RPO) Code | L35 VIN Code W |
| Displacement | 262 |
| Bore | 4.012 |
| Stroke | 3.480 |
| Compression Ratio | 9.2:1 |
| Firing Order | 1-6-5-4-3-2 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.